2005 CHN 613 - Price $115,000
427 Mack Engine with Fuller 8 LL Transmission Mack rear ends; 14,600-pound front with 38,000 rears;
236,523 miles / 6740 hours;has Watson pusher axle and 2005, 16-foot aluminum J-Kraft gravel body;
box lined with 10 gauge steel; set up to pull pup trailer; truck is serviced weekly; new steering tires and
drive tires are 75%, New brakes spring 2008
Pup Trailer - Price $18,000
Custom built trailer with 12-foot pole, 2005 15' Reiten Aluminum gravel body, Tires are 50%,
New brakes Spring 2008
427 Mack Engine with Fuller 8 LL Transmission Mack rear ends; 14,600-pound front with 38,000 rears;
236,523 miles / 6740 hours;has Watson pusher axle and 2005, 16-foot aluminum J-Kraft gravel body;
box lined with 10 gauge steel; set up to pull pup trailer; truck is serviced weekly; new steering tires and
drive tires are 75%, New brakes spring 2008
Pup Trailer - Price $18,000
Custom built trailer with 12-foot pole, 2005 15' Reiten Aluminum gravel body, Tires are 50%,
New brakes Spring 2008
Cummins/Kato Generator Set - Price $20,000
Specs: 8,000 hours
KW: 260/200, 3 Phase
Volt 480
Model # 260-497-36111, WATT: 300, RPM 1800
Type 22-70, Engine Model # NTA-355 - Serial # 30112141
Specs: 8,000 hours
KW: 260/200, 3 Phase
Volt 480
Model # 260-497-36111, WATT: 300, RPM 1800
Type 22-70, Engine Model # NTA-355 - Serial # 30112141
| For Sale |
| Check back often for updated inventory! |
| shop trailer $2,000 |
| 2001 966G 15,200 hrs, new pins and center pins at 14,000 hrs, in frame overhaul at 15,000 hrs, all lights work, heater and AC, tires 50%, good glass, cutting edge 50%. Cylinders do not leak, service records on hand. Owned since 5,000 hrs $110,000 |
| 1997 744H was a relife unit it 2007 with new or reman major components. 7300 hrs. New injectors. Ride control, tires 80%, all lights work, heater and AC. Cutting edge 70%. Good glass, pins are tight, does not use oil, cylinders do not leak, service records on hand. Owned since 2007 with zero hrs. $110,000 |
| 2002 966G II 17,000 hrs, new pins at 15,000 hrs, all lights work, heater and AC, tires 50%, good glass, cutting edge 50%, uses ½ gal. oil to 250 hrs, little oil leaks on 2 cylinders, service records on hand. Owned since new. $90,000 |
| Cedar Rapids 5x16 triple deck with discharge conv $85,000 |
| Kolman 50'x30" feed conveyor $40,000 |
| 1995 J-Kraft trailer w/14' box $12,000 |
| 1997 J-kraft trailer w/15' box $15,000 |
| 1997 CH 613 Mack w/16' box 640,000 mi. $30,000 |
| 2000 CH 613 Mack w/16' box 450,000 mi. $55,000 |
| 2003 CH 613 w/15' box 400,000 mi. $65,000 |
| Dunham pup trailer 12' steel box new tires $9,000 |
| built 30"x20' feed conv. 10 yard hopper, w/remote dump and adjustable 3" bars $15,000 |
| Roto Phase Convertor $20,000 |
| Roto Phase Info |
| 12.5' Alu. box $8,000 |
| Roto Phase Convertor $20,000 |
| Gen set trailer $10,000 |
| Cedar Rapids 5x16' triple deck w/ discharge conv. $85,000 |
| 75 KW Cat Gen 8000 hrs. $10,000 |
| Custom built 30"x80' Radial Staking Conv. $20,000 (6 total) |
| Roto Phase Convertor $20,000 |
| Custom built 30"x60' Radial Staking Conv. $15,000 |
| **Listings** Two screening plants for sale, each plant consists of one feed conveyor, one 5x16 triple deck screener, three 30'x80 staking conv. with generator sets or 3 phase power. |
| ’09 Sterling w/16ft. box $145,000 |
| ’02 966G II w/4.5 yard bucket – new tires $185,000 |
| 450KW Cummings Generator 6,000hrs - $20,000 |
| ’00 CH613 Mack w/460 engine 16 ft. box, 450k miles - $65,000 |
| ’97 J-Kraft w/15 ft. box $15,000 |
| ’96 J-Kraft w/16ft. box $18,000 |
| 07 Sterling w/16ft. gravel box 50k miles - $125,000 |
| 2002 966G II CAT Loader - $95,000 - Download pictures |
| Swamp Mats - $75/mat -Download pictures |
Olson Gravel, Inc.
 | |  | |  | |  | |  | |  | |  | |  |